Great Plains Strobe Kit Assembly

I purchased two Great Plains Strobe kits.  Both worked on the 1st try.  Once the boards were assembled
I installed the two kits together in a Radio Shack "Project box".  This way the assembly w
as well
protected when I install
ed it in my airplane.  Only problem I had or saw in the kit that I corrected was the
mounting of the Blue Trigger Coil. I thought the connecting wire was too flimsy, so when I mounted it to
the board I glued it into a base of epoxy to make it secure.
Strobe Box with two kits installed inside a Radio Shack Project Box.
Blue Trigger Coil is at the bottom center of the photo.
I epoxied the strobe lights into a simple light base, that will be mounted on the airplane